If you wonder how to reset 2010 Honda Accord oil life, here is the answer. There are several different models of the Honda Accord, which means that each car has slightly different maintenance needs. Resetting your car’s oil life will determine how the computer will calculate how many miles your engine has gone since you last changed it. This information is important for determining when to change your oil and filter again.
The oil life reset for a 2010 Honda Accord is done at a dealer, by a dealership mechanic. If you own your car and have access to a Honda manual, you can do this yourself by following these steps:
- Take out your car’s manual and find the page with the maintenance schedule.
- Find an oil change interval that is less than 3000 miles. This means that you can reset your oil life for less than 3,000 miles.
- Turn on the engine, and warm it up.
- Restart the engine after turning it off.
- The dashboard will display a message asking if you want to reset your oil life. Select “yes,” and then turn off the engine again.
- Now, you can reset your oil life. You should see a message on the dashboard that says “oil life reset completed” or something similar.
- The car will now display your new oil life.
- The steps above may be different depending on which model of vehicle you have, so make sure to consult your manual before doing this yourself.
How To Reset 2010 Honda Accord Oil Light?
If you have an older Honda Accord, the process is slightly different. Start by turning off your car and waiting for a few minutes before restarting it again. When you start your vehicle again, you’ll see an oil light on the dashboard that blinks. The steps above may be different depending on which model of vehicle you have, so make sure to consult your manual before doing this yourself.
You’ll need to reset the 2010 Honda Accord oil light in your Honda Accord by pressing the brake pedal, turning on the ignition and releasing the clutch. You should see a flashing “OIL” message on the dashboard, which means that your car is now ready for use again.
What Kind Of 2010 Honda Accord Oil Does My Car Take?
Your 2010 Honda Accord takes 5W-20 or 5W-30 oil, which is the most common type of motor oil. You can find this at any auto shop or mechanic’s office. The reason that you need to use these types of 2010 Honda Accord oils is because they have a thicker consistency than others and will protect your engine better during cold weather conditions.
However, they also allow you to use other types of motor oil that meet the following requirements:
- API Service Grade SN or higher
- ACEA A3/B4, A3/B5, A3/B6, C3
- The viscosity must be SAE 5W-20 or SAE 5W-30
- The API service classification number must be SG, SL or SJ – 5W-20 r 5W-30 oil
- API grade SN or higher
- ACEA A3/B4
Does 2010 Honda Accord Oil Use Synthetic Oil?
Synthetic 2010 Honda Accord oil is a type of motor oil that has been made from natural gas, rather than crude oil. This means that it’s much cleaner than conventional oils, which have a higher concentration of impurities.
As such, synthetic motor oil can withstand temperatures up to about 300 degrees Fahrenheit higher than conventional oils without breaking down. It has many benefits, including:
- Better lubrication properties
- Increased protection against rust and corrosion
- Better wear resistance. This is because synthetic motor oil is made from a combination of refined base stocks and natural gas. These are then mixed together with various additives to create the final product.