The Honda Accord taillights on your car will begin to fade and crack as soon as you drive off the lot. To avoid an expensive repair down the road, it’s a good idea to replace your taillights as soon as possible. Light bulbs can also burn out and make it difficult to see out of your vehicle at night; replacing a light bulb is an inexpensive alternative to buying a new Honda Accord taillight.
Here is step by step guide to how to replace Honda Accord taillights:
- Park your Honda Accord on a flat, level surface. Place a blanket or something soft under the car to protect it from scratches.
- Locate the taillight assembly on your Honda Accord by looking for two plastic covers that are located at the top of each rear quarter panel. The covers should be easy to remove with just your fingers; if they’re stuck, try using a screwdriver instead.
- Remove the two bolts that are holding the taillight assembly in place using a socket wrench.
- Pull up on the taillight assembly to remove it from your Honda Accord, then set it aside.
- Remove the two bolts that are holding the bulb assembly in place using a socket wrench, then pull up on the assembly to remove it.
- Pull out your old bulb and replace it with a new one by pushing it into place, then reattach the bulb assembly to your Honda Accord.
Why Is My Honda Accord Taillight Is Not Working?
If your Honda Accord taillight is not working, you will need to inspect the bulbs and connections. Honda Accord taillight not working is a blown bulb. This can happen as the result of an accident or from simply driving over bumps too hard, which can cause the filament inside the bulb to break. If you see that your taillights are bright with no cracks and there isn’t any visible damage around them, then it’s likely that one of your bulbs has burned out.
If you notice that only one of your taillights is not working, check to make sure that the bulb hasn’t burned out; if it has, replace it before trying again.First, make sure that the bulb is not burned out or broken; if it is, replace it with a new one. Next, check that all of the wires are connected securely; if they’re loose, tighten them using pliers. The most common reason for your Honda Accord taillights not working is simply a loose connection. If you’ve checked all of these, and you still can’t get your lights to work, then it’s likely that the problem is with your taillight assembly.
What Is The Average Honda Accord Taillight Cost?
The cost of your Honda Accord taillight will depend on the type of taillight that you need. If you need to replace the entire assembly, then expect to pay around $45-$110; however, if only the bulb is broken, it should be much cheaper. In some cases, though, it may be more cost-effective to simply replace the whole assembly rather than just a single part.
The cost of a Honda Accord taillight depends on how much work needs to be done. If you need new bulbs, sockets and wiring, then the cost could be around $100 or more; however, if you simply want to replace the lens on your taillights, it may only be about $30.
Here are some factors that effect your Honda Accord taillight cost: The location of the break (If it’s on the outer edge of the lens, then you can consider yourself lucky. This is because there will be less work involved in replacing it and it should cost less).
The year of your Honda Accord (A newer model will cost more than an older one). The make and model of your vehicle (Some cars are more expensive to repair than others).